F-15 EAGLE
SOLID OLLIE OCTOBOARD



Photos   |  Specifications   |  Videos   |  Variant   |  Notes

Buy on Etsy


This is an experimental build of the Solid Ollie Octoboard fingerboard deck. The bottom side of the deck has the F-15 Eagle front and top blueprint laser engraved.
The deck profile and shape are the same as the other Ollie series decks.

This fingerboard is a solid version of our aerospace inspired fingerboard Ollie the Octoboard. Instead of having weight reduction features like a Hex or Isogrid structure this deck is solid aluminum metal. Being solid aluminum this board clocks in at 16g (0.56oz) providing am extremely rigid body; safety-factor of 10+.
Becauce the board is extreamly stiff and inelastic it has very good pop characteristics.

I 3D CNC machine these decks out of solid 6061 aluminum plates, then manually texture the surface by either sandblasting or polish them. Changing the surface finish yields a different finish color tone after anodizing. I then use a 60W Laser to lasercut the matching grip tape and product box - all made in-house!

Dimensions: 98.5mm x 32mm - High Kick (25Deg, 23Deg), Medium concave (2mm).



Specialty Features

Solid Aluminum Body

Medium-high kick, medium concave

F-15 Eagle blueprint laser engraved

Matching lasercut grip tape included

F-15 Eagle Lineup

F-15 EAGLE

Laser engraved fighter schematic
F-15 Eagle with sample trucks

F-15 EAGLE

Deck with sample trucks
F-15 Eagle with sample trucks

F-15 EAGLE

Deck with sample trucks
F-15 Eagle Black

STEALTH BLACK

Front side engraving
F-15 Eagle Red

CAUTION RED

Front side engraving
F-15 Eagle Blue

AFTERBURNER BLUE

Front side engraving
Solid Ollie with laser engraved F-15 Design

F-15 EAGLE

Schematic Engraved
Solid Ollie with laser engraved F-15 Design

F-15 EAGLE

Schematic Engraved
Solid Ollie with laser engraved F-15 Design

F-15 EAGLE

Schematic Engraved
F-15 Eagle Blue

AFTERBURNER BLUE

Rear side engraving
F-15 Eagle Black

STEALTH BLACK

Rear side engraving
F-15 Eagle Blue

SURFACE FINISH

Engraving on Machined Finish (L) vs. Sandblasted (R)
F-15 Eagle Grip Tape

GRIP TAPE

Matching Lasercut Grip Tape
F-15 Eagle Grip Tape

GRIP TAPE

Applied griptape to Caution Red Deck
F-15 Eagle Grip Tape

GRIP TAPE

Applied griptape to Caution Red Deck


Specifications

Weight

16g (0.56oz)

Width

32mm (1.26in)

Length

98.5mm (3.88in)

Kick front

23°

Kick back

25°

Concave

2mm

CNC setups

3

CNC time

24 minutes/unit

Tools

4

Surface finish

Sandblasted | Polished | Machined

Plating finish

Type II anodize

Material

Aluminum - 6061-T6

CO2 Laser

F15 Eagle Blueprint Engraved

CO2 Laser Run time

8 Min Total

A glimpse of the second operation (OP2) of manufacturing the fingerboard, Ollie the Octoboard.

Process of sandblasting the fingerboard to change the surface texture before anodizing. Comparing color finish between different surface finishes after color anodizing.



Variant

Mk1     -     The Mark 1 variant is the first generation of our fingerboards.
Mk2     -     The Mark 2 variant has countersinks to fit trucks where the kingpin protrude on the back side without requiring modifications to the trucks.
Mk3     -     The Mark 3 variant has optimized hole sizeing and spacing to work more easy with all trucks.



Notes

Deck Only
Comes with two (x2) sheets of laser cut grip tape that have "F-15 Eagle" text cut out and matches the deck perimeter.
Bottom is laser engraved with the F15 Eagle Front and Top technical blueprint. Bottom of deck is cnc engraved with the Octocnc logo.

The final anodize color may vary between batches depending on numerous factors such as material finish, amount and age of the dye used, time the part is left in the anodization tank, etc.




We'd like to hear from you! For any requests or feedback, send us a note at contact@octocnc.com