This fingerboard is a Ultra-Light Solid version of the original solid aerospace-inspired fingerboard, Ollie the Octoboard.
In contrast to the regular solid aluminum metal deck the this Ultra-Light version has a reduced thickness to yield a 30% weight reduction to 11 grams instead of the 16g of the regular solid aluminum deck.
The deck is still strong enough to resist bending or deformation with a reasonable margin of safety.
The deck profile and shape are the same as the other Ollie series decks.
I 3D CNC machine these decks out of solid 6061 aluminum plates, then manually texture the surface by either sandblasting or polish them. Changing the surface finish yields a different finish color tone after anodizing.
I then use a 60W Laser to lasercut the matching grip tape and product box - all made in-house!
Dimensions: 98.5mm x 32mm - High Kick (25Deg, 23Deg), Medium concave (2mm).
CNC Aluminum Metal Body
Medium-high kick, medium concave
30% lighter; 11 grams
11g (0.39oz)
32mm (1.26in)
98.5mm (3.88in)
23°
25°
2mm
3
24 minutes/unit
4
Sandblasted | Polished | Machined
Type II anodize
Aluminum Metal - 6061-T6
Machined grip on top surface
[See MG version]
Mk1 - The Mark 1 variant is the first generation of our fingerboards.
Mk2 - The Mark 2 variant has added countersinks to fit trucks where the kingpin protrude on the back side without requiring modifications to the trucks.
Mk3 - The Mark 3 variant has optimized hole sizeing and spacing to work more easy with all trucks.
Mk4 - The Mark 4 variant is same as Mk3 but deeper recess for trucks king pin.
Deck Only
Comes with one sheet of laser cut grip tape matching the Ollie Octoboard hex features and perimeter (1mm thick).
Bottom of deck is engraved with the Octocnc logo.
-The final anodize color may vary between batches depending on numerous factors such as material finish,
amount and age of the dye used, time the part is left in the anodization tank, etc.
-Machined finish (Mill finish) is the natural surface finish as it comes directly from the cnc machine giving it a unique look. This finish will slightly show the machining/tool-path lines and might include minor aberrations.
I like to hear from you! For any requests or feedback, send me a note at manu@octocnc.com
